01
Lined 25 kg sacks
Woven sacks with a sealed inner liner that keeps ambient moisture away from the pore structure in storage and transit.
Home/Production Info
How Our Activated Carbon Is Made
Six controlled steps from raw material to sealed sack — with independent laboratory verification built into the flow.
Production Process
Six steps, no shortcuts
Particle size is decided at the start, adsorption capacity is decided in the kiln, and both are confirmed in the laboratory before anything is bagged.
Crushing
Raw material is milled into granules, the first step in controlling final particle size.
Filtering
Granules are screened and sorted into precise mesh fractions: 4x8, 6x12 and 8x30.
Submersion
The sorted carbon is soaked in treatment baths to prepare it for activation.
Burning
High-temperature thermal activation opens the pore structure that gives activated carbon its adsorption power.
Quality Control
Every batch is tested in-house, and grades are verified by independent Sucofindo laboratory analysis.
Packing
Finished carbon is weighed, bagged into lined 25 kg sacks and sealed for clean, secure transport.
On the Floor
Two of those steps, in motion
Filmed on our own floor on a phone rather than by a crew — which is rather the point. Stock photography can be bought; a kiln discharging and a hand full of screened granules are harder to borrow. Both clips are short and silent, and neither downloads until you press play.
In-house column testing before a batch is released
Quality Control
Tested in-house, then verified independently
Every batch passes our own laboratory before it leaves the line. On top of that, production samples are sent to IDSurvey / PT Sucofindo — an independent testing body — and analysed under SNI 06-3730-1995, the Indonesian standard for technical activated carbon.
The parameters covered are moisture, ash, loss on heating at 950 °C, material passing mesh 325, bulk density, pure activated carbon content, iodine adsorption and methylene blue adsorption. We publish those reports in full rather than summarising them.
Order & Terms
Terms are agreed per contract
We serve small orders and bulk contracts, domestic and export. Tell us your quantity, destination and target specification and we will send a firm offer — usually within one business day.
Minimum order
Contact us
— Small trial quantities accepted
Payment terms
Contact us
— Agreed per order
Lead time
Contact us
— Depends on grade and volume
Shipment terms
Contact us
— Domestic and export
Production capacity
Contact us
— Ask for current availability
Packaging
Lined 25 kg woven sacks, sealed
Packaging
Sealed for clean transport
Activated carbon is hygroscopic — it adsorbs moisture from the air as readily as it adsorbs contaminants from water. Packing is therefore part of the specification, not an afterthought.
01
02
Weighed per bag
Each bag is weighed as it is filled, so the net weight you order is the net weight that arrives.
03
Stacked ready to load
Sealed sacks stack flat and travel palletised, so a container plan can be built around your handling equipment.
Standard bag is 25 kg net. Pallet count and container loading plan are confirmed per order — ask us when you request a quotation.
Visit Our Factory
See the kilns for yourself
Buyers are welcome at our production site in Tanjungsari, Kab. Bogor. Message us to arrange a visit and we will schedule it around a firing run so there is something to see.
FAQ
Frequently asked questions
What iodine numbers can you supply?
We produce granular activated carbon in three iodine grades — below 1,000 mg/g, above 1,000 mg/g, and 1,200 mg/g — and we can adjust the grade to match your specification. Independent Sucofindo tests of our production have measured iodine adsorption up to 1,279.13 mg/g.
Which mesh sizes are available?
Standard mesh fractions are 4x8 (coarse), 6x12 (medium) and 8x30 (fine). Ask us if your application needs a different fraction.
Do you serve small orders or only bulk?
Both. We serve small orders and large-volume contracts alike — tell us your required quantity and we will quote accordingly.
Is your carbon independently tested?
Yes. Our activated carbon is analysed by IDSurvey / PT Sucofindo using the SNI 06-3730-1995 method, covering moisture, ash, pure activated carbon content, bulk density, iodine adsorption and methylene blue adsorption. The full figures are published on this website.
What is it used for?
Our granular activated carbon is produced for water purification and for capturing metals in industrial process streams. Its high pure-carbon content and adsorption capacity also suit general industrial filtration.
How do I request a quotation?
Contact us on WhatsApp or by email with your target iodine number, mesh size and quantity. We typically respond within one business day.